 |
| Quantity: | |
|---|---|
DCMQ-370
Denchern
This machine is with paper infeed intermittent mode, run speed fast, die cutting station is designed with floating type guide post, when run in high speed, machine vibrate small, pressure average, speed can reach 120m/min. Because of double pulling design, die cutting infeed and outfeed run in constant speed. The machine can be equipped with flexo varnish, cold foil, flat bed hot stamping, lamination, slitting, sheeting etc.unit.
| Model | 370 |
| Max. Mechanical speed | 120m/min(400Times) |
| Max. Unwind width | 380mm |
| Max. Die cutting area | 370*350 |
| Die cutting precision | ±0.15mm |
| Max. Unwind diameter | 800mm |
| Max. Rewind diameter | 800mm |
| Air source | 0.6Mpa |
| Power | 16KW |
| Overall size | 2800*1750*1600mm |
This machine is with paper infeed intermittent mode, run speed fast, die cutting station is designed with floating type guide post, when run in high speed, machine vibrate small, pressure average, speed can reach 120m/min. Because of double pulling design, die cutting infeed and outfeed run in constant speed. The machine can be equipped with flexo varnish, cold foil, flat bed hot stamping, lamination, slitting, sheeting etc.unit.
| Model | 370 |
| Max. Mechanical speed | 120m/min(400Times) |
| Max. Unwind width | 380mm |
| Max. Die cutting area | 370*350 |
| Die cutting precision | ±0.15mm |
| Max. Unwind diameter | 800mm |
| Max. Rewind diameter | 800mm |
| Air source | 0.6Mpa |
| Power | 16KW |
| Overall size | 2800*1750*1600mm |
